Un-interrupt Power Supply UPS-AVR
 

SPECIFICATIONS

 
Model Capacity Phase/Wire Input Voltage Output Voltage Dimension

NTAC-1003

300AV

1Ø 2W/G

or

1Ø 3W/G

110V , 220V

or

110V / 220V

100V ,110V,

115V , 120V

or

200V , 220V ,

 230V

20×19×33

NTAC-1005

500AV

NTAC-1010

1KAV

16×30×40

NTAC-1020

2KAV

48×32×40

NTAC-1030

3KAV

NTAC-1050

5KAV

48×30×51

NTAC-1075

7.5KAV

75×40×45

NTAC-1100

10KAV

130×50×50

NTAC-1150

15KAV

 Principle:

Harmonic

Voltage Range:

Set voltage +20%

Output Stability:

1 + 1%

Output Wave

Loss 3%

Response Speed:

Under 1½ Cycle.

Efficiency:

85%

FEATURES

Be able to resist short circuit, isolate electricity, and eliminate noise.

Excellent voltage regulation features, the possibility of error motion is zero. Because there is no internal control circuit, it is constituted (On interrupted Power Supply) by two single devices.

If output over loading or short, it will auto limit current (Even circuit short for one hour, no damage will be occurred).

Output wave would not be influenced by wave. When input wave is extremely bad, the efficiency will only be reduced mildly, and output wave will still remain to be sine wave. 

The input an output are absolutely isolated. It is with excellent resistance, above 60bd, against static, thunder noise high voltage pulse, etc.

The input voltage could be 110V or 220V, The output voltage could simultaneously use 110V and 220V.

The response to SURGE is excellent. When input voltage is suddenly raised to 170V, output could remain at 110V + 2.5. The response to SAG is excellent. When input voltage is suddenly reduced to be 65V, although the loading is below 6%, the output could still remain at110V + 2.5%. 

 


Please explored by IE5.0, and Resolution 800*600