| |
|
|
|
Tension
Calibration
Device
TCD |
|
Back |
|
|
|
|
|
|
|
● |
Principle： |
Make use of
weight and lever
principle
combing with
construction
design, to get
the standard
weight for the
calibration
tension meter. |
|
● |
Speed： |
2/4/6/8/10/12/14/16/18/20/22/24
m/min, 12 grades
in total (CW/CCW
for option) |
|
● |
Range： |
The standard
weight 20g, which is divided by 10 big grids, and 2g for each grid, then is
divided by 10 small grids, and 0.2g for each one. |
|
The standard
weight 200g (20+180), which is divided by 10 big grids, and 20g for each
grid, then is divided by 10 small grids, and 2g for each one. |
|
The standard
weight 1000g (20+980), which is divided by 10 big grids, and 100g for each
grid, then is divided by 10 small grids, and 10g for each one.（option） |
|
● |
Scale of Weight： |
The standard
weight 20g with
resolution 0.01g、180g
with resolution
0.05g, one piece
for each item,
also weight 1000
g（20+980）with
resolution 0.1g
for option. |
|
● |
Dimension： |
(D×W×H)
180×260×360
cm. |
|
● |
Weight： |
8 Kg |
|
● |
Power Supply： |
Standard AC220V，or
other power
according to
requirement，50Hz，0.5A，charge
time8~12 hours. |
|
|
|
|
|
|
|
|
|
|
● |
Made of imported
aluminum-alloy
for each part,
and the fixed
screw made of
imported
stainless steel. |
|
● |
Equipped with
horizontal air
bubble and
alignment pin,
for horizontal
adjustment to
improve the
accuracy of
calibration. |
|
● |
With weight
design of
balance lever of
sharp zero
adjustment, to
improve the
accuracy of zero
point. |
|
● |
Easy to handle,
convenient to
carry with, no
need to plug,
charge
internally, can
carry to
calibrate on
spot. |
|
● |
With 12 grades
speed adjustment
design, to be
used upon the
request of
customers. |
|
● |
CW/CCW turning
design,
applicable for
kinds of places
and models of
tension meter. |
|
● |
There are three
types of
weights: small
one 20g, middle
one 200g（20+180）,
big one 1000g（20+980）
for option
according to
practical
requirements. |
|
● |
Specified weight
and spare parts
drawer with lock
design, which is
convenient to
manage, collect,
and avoid
missing spare
parts. |
|
● |
Save-energy
design, keep
using for 10-12
hours for each
charge for 8-12
hours. |
|
● |
Kinds of load
cell and clamp,
such as Germany
TEXTECHNO-Elmatex、Germany
Hans-schmidt-ETM、Swiss
Rothschild’s
load cells,
Swiss Desax-Tension
Star、and
Japanese check
master tension
meter，and
customized
orders are
acceptable. |
|
|
|
